How do I access my Original Lunars settings?

This is a support article covering how to access the settings on the Original Acaia Pearl scale.

Step-by-step guide

On Lunar firmware versions 2.5.067 and below, accessing the Lunar's Settings Menu is the same as the Pearl.

1. While your scale is off, hold the Power Button until it shows "nACAIA" -> "SEt", and then hold the T button at the same time. 
2. Hold both buttons until you hear a beep and the display shows F.0000. Release both buttons.
3. Long-press T four times to enter the passcode "0000" and enter the Settings Menu.
4. Tap the T button to scroll through all the settings
5. Long-press the T button to edit a setting
6. Tap T to scroll through the setting's options
7. Long press T to save your selection

On Lunar firmware versions 2.6.003 and newer, the way to enter the Settings Menu is slightly different. 

1. While your scale is off, hold the Power Button until it shows "nACAIA" -> "SEt". Now release the power button and tap the T button. The scale will now enter the Settings Menu. There is no need to enter a passcode. 
2. Tap the T button to scroll through all the settings
3. Long-press the T button to edit a setting
4. Tap T to scroll through the setting's options
5. Long press T to save your selection