Back to website Submit a ticket
Welcome
Login  Sign up

How to replace your Ode's hopper

Here’s a quick guide on how to switch out your Ode Brew Grinder's hopper!


You will need a 2 mm Allen wrench, a Fellow soft brush and a replacement hopper.


A quick tip: The load bin screws are installed with Loctite which can make them difficult to remove. To make this easier, get the screw started by inserting the shorter end of the Allen key and then pressing down on the longer end to get more leverage. Be careful to prevent stripping the screw. If you hear a clicking noise, it’s Loctite on the screws loosening and not your grinder breaking!      



Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.