How do I access my Original Pearls settings?

This is a support article covering how to access the settings on the Original Acaia Pearl scale.

Step-by-step guide

1. On all original Pearl firmware versions, while your scale is off, hold the Power Button until it shows "nACAIA" -> "SEt", and then hold the T button at the same time. 
2. Hold both buttons until you hear a beep and the display shows F.0000. Release buttons.
3. Long-press T four times to enter the passcode "0000" and enter the Settings Menu.
4. Tap the T button to scroll through all the settings
5. Long-press the T button to edit a setting
6. Tap T to scroll through the setting's options
7. Long press T to save your selection